[zenoss-users] Re: Windows servers not reporting hardware information

[AsGF2MX]

Just pipe the above command to a text file 


Code:
snmpwalk -v1 -c<Community name> <IP Address> >> myfilename.txt



When it returns to a prompt, just type

Code:
cat myfilename.txt | less



Then browse through the items. The ones you posted look like individual process time slices; the number following the object type looks like a PID. I don't think these are the ones you are after. 

The MIBs issed by SNMP informant are in ZenOSS.


carls wrote:
> Hi AsGF2MX,
> 
> I did as such and looks like i did get cpu inofrmation back:
> 
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.8208 = INTEGER: 15811
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.9336 = INTEGER: 1
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.9564 = INTEGER: 4
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.10148 = INTEGER: 6
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.10556 = INTEGER: 3
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.10856 = INTEGER: 7
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.11060 = INTEGER: 163
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.11268 = INTEGER: 11
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.12268 = INTEGER: 53228
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.12956 = INTEGER: 13
> HOST-RESOURCES-MIB::hrSWRunPerfCPU.13232 = INTEGER: 337
> 
> 
> Couldn't see it all as it went past my scroll area. (sure there's a way round that but pushed for time, atm.)
> If that is the CPU information that would point to a configuration issue on my part with zenoss, correct?
> 





-------------------- m2f --------------------

Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=19224#19224

-------------------- m2f --------------------