[zenoss-zenpacks] Re: Trying to install WMI zenpack

[Eric Julson]

Well crud.  I guess that would be a problem with wmic then.  Since wmic is a component of Samba, I doubt there is anything that can be done to fix it here.
 
On the other hand, I converted all of my scripts for this ZenPack to Perl and changed the way they parse the output so even if you get the errors like these, it will still grab the correct output.  I should have an updated version of the ZenPack by Wednesday and I'd love it if you could test it before it's published to see if it handles the errors you are seeing.
 
 
Thanks,
 
Eric Julson
Halo Advantage
www.haloadvantage.com <http://www.haloadvantage.com/> 
515-991-3901

________________________________

From: zenoss-zenpacks-bounces at zenoss.org on behalf of James Pulver
Sent: Mon 11/5/2007 11:27 AM
To: Discussion regarding the use, development and sharing of ZenPacks.
Subject: Re: [zenoss-zenpacks] Re: Trying to install WMI zenpack



I'm sorry, I may have been unclear - on the command line with wmic, I
get the same output no matter if I use
//host.bar.com
or
//192.168.1.15
for instance.

--
James Pulver
Information Technology Area Supervisor
LEPP Computer Group
Cornell University



Eric Julson wrote:
> Right, as you should, but I'm just wondering if changing from using the name of the device to using the IP of the device will result in the same problem.  Theoretically it should fix the problem.  I just want to verify it does since I can't recreate the problem in my environment. 
> 
> If it does fix your problem, I'm going to change the ZenPack to use the managed IP to connect versus the name of the device.
> 
> 
> Thanks,
> 
> Eric Julson
> Halo Advantage
> www.haloadvantage.com <http://www.haloadvantage.com/>
> 515-991-3901
>
> ________________________________
>
> From: zenoss-zenpacks-bounces at zenoss.org on behalf of James Pulver
> Sent: Mon 11/5/2007 11:12 AM
> To: Discussion regarding the use, development and sharing of ZenPacks.
> Subject: Re: [zenoss-zenpacks] Re: Trying to install WMI zenpack
>
>
>
> I actually get the same output and errors on the command line with wmic ...
>
> --
> James Pulver
> Information Technology Area Supervisor
> LEPP Computer Group
> Cornell University
>
>
>
> Eric Julson wrote:
>> Hmm... Can you run try to call the script using the IP of the device you want to connect to?  If so, does it give you the same error?
>>
>> Eric Julson
>> Halo Advantage
>> www.haloadvantage.com <http://www.haloadvantage.com/>
>> 515-991-3901
>>
>> ________________________________
>>
>> From: zenoss-zenpacks-bounces at zenoss.org on behalf of James Pulver
>> Sent: Mon 11/5/2007 10:36 AM
>> To: zenoss-zenpacks at zenoss.org
>> Subject: Re: [zenoss-zenpacks] Re: Trying to install WMI zenpack
>>
>>
>>
>> Hmm, I might, but what is weird is this is on an NT4 domain with Unix
>> DNS. nslookup gives server can't find 192.168.199.1: Non-existent domain
>> ... so that doesn't seem like the issue to me?
>>
>> --
>> James Pulver
>> Information Technology Area Supervisor
>> LEPP Computer Group
>> Cornell University
>>
>>
>>
>> ejulson wrote:
>>> I think the problem you are having is related to AD DNS.  Do you have the "Register this connections addresses in DNS" checkbox set in the Advanced TCP/IP Settings for the virtual network adapters?  If so, you will have DNS entries for these which you don't want.
>>>
>>>
>>>
>>>
>>> -------------------- m2f --------------------
>>>
>>> Read this topic online here:
>>> http://community.zenoss.com/forums/viewtopic.php?p=12728#12728
>>>
>>> -------------------- m2f --------------------
>>>
>>>
>>>
>>> _______________________________________________
>>> zenoss-zenpacks mailing list
>>> zenoss-zenpacks at zenoss.org
>>> http://lists.zenoss.org/mailman/listinfo/zenoss-zenpacks
>> _______________________________________________
>> zenoss-zenpacks mailing list
>> zenoss-zenpacks at zenoss.org
>> http://lists.zenoss.org/mailman/listinfo/zenoss-zenpacks
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>>
>> SECURITY NOTICE:
>>
>> The mail system has removed a Microsoft attachment for security reasons.
>> The sender should disable sending Rich Text format in Outlook and
>> disable sending TNEF to the Internet from their Microsoft Exchange gateway.
>>
>> See http://support.microsoft.com/support/kb/articles/Q241/5/38.ASP
>> and http://www.microsoft.com/TechNet/exchange/2505ch10.asp
>> for more information.
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> zenoss-zenpacks mailing list
>> zenoss-zenpacks at zenoss.org
>> http://lists.zenoss.org/mailman/listinfo/zenoss-zenpacks
> _______________________________________________
> zenoss-zenpacks mailing list
> zenoss-zenpacks at zenoss.org
> http://lists.zenoss.org/mailman/listinfo/zenoss-zenpacks
>
>
>
>
> ------------------------------------------------------------------------
>
>
> SECURITY NOTICE:
>
> The mail system has removed a Microsoft attachment for security reasons.
> The sender should disable sending Rich Text format in Outlook and
> disable sending TNEF to the Internet from their Microsoft Exchange gateway.
>
> See http://support.microsoft.com/support/kb/articles/Q241/5/38.ASP
> and http://www.microsoft.com/TechNet/exchange/2505ch10.asp
> for more information.
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> zenoss-zenpacks mailing list
> zenoss-zenpacks at zenoss.org
> http://lists.zenoss.org/mailman/listinfo/zenoss-zenpacks
_______________________________________________
zenoss-zenpacks mailing list
zenoss-zenpacks at zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-zenpacks


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 10204 bytes
Desc: not available
Url : http://lists.zenoss.org/pipermail/zenoss-zenpacks/attachments/20071105/4e3025a0/attachment-0001.bin